Tool Guide
The Tool Guide shows the combinations of pipe and well casing diameter each tool works with. The listed information is for the minimum amount of clearance required. If you do not see your setup listed, or need help, please fill out the form at the bottom of the page. We are here for you!
200 SERIES: THE NARROWEST TOOL IN OUR LINEUP DESIGNED FOR SMALL DIAMETER PIPES AND CASINGS
For pipes without an attached coupling
-
¾” Pipe inside of a 2” or larger Casing
-
1” Pipe inside of a 2” or larger Casing
-
1” Schedule 80 PVC pipe inside of 2” or larger Casing
-
1" Schedule 120 PVC inside of a 2" or larger Casing
-
2” Pipe inside of a 3” Casing
For pipes with an attached coupling
-
¾” Pipe with smooth style coupling inside of a 2” or larger casing
-
1” Pipe with an attached smooth style coupling inside of a 3” or larger casing.
-
1 ¼” Pipe with an attached smooth style coupling inside a 3” or larger casing.
-
1 ½” Pipe with an attached smooth style coupling inside of a 3” or larger casing.
-
*Will not work with a banded coupling or on schedule 80 or 120 PVC with an attached coupling.
210 SERIES: MEDIUM SIZED TOOL DESIGNED FOR A WIDE RANGE OF PIPES AND CASINGS
For pipes without an attached coupling
-
1” Pipe inside of a 3” or larger casing
-
1 ¼” Pipe inside of a 3” or larger casing
-
1 ¼” Schedule 80 PVC inside a 3” or larger casing.
-
1 1/4 Schedule 120 PVC inside of a 3" or larger casing.
-
1 ½” Pipe inside of a 3” or larger casing.
For pipes with an attached coupling
-
1” Pipe with a smooth style coupling inside of a 3” or larger casing
-
1 ¼” Pipe with a smooth style coupling inside of a 3” or larger casing.
-
*Will not work with a banded coupling or on schedule 80 or 120 PVC with an attached coupling.
214 SERIES: HEAVY-WEIGHT TOOL DESIGNED FOR LARGER PIPES AND CASINGS
For pipes without an attached coupling
-
1 ¼” pipe inside of a 3” or larger casing.
-
1 1/4 schedule 80 PVC inside of a 3" or larger casing.
-
1 1/4 schedule 120 PVC inside of a 3" or larger casing.
-
1 ½” pipe inside of a 4” or larger casing.
-
2” pipe inside of a 4” or larger casing.
For pipes with an attached coupling
-
1 ¼” pipe with a banded or smooth style coupling inside of a 4” or larger casing.
-
1 ¼” schedule 80 PVC with banded or smooth style coupling inside of a 4” or larger casing.
-
1 1/4 schedule 120 PVC with banded or smooth style coupling inside of a 4" or larger casing.
-
1 ½” pipe with a banded or smooth style coupling inside of a 4” or larger casing.
-
2” pipe with a smooth style coupling inside of a 4” or larger casing.
-
2” pipe with a banded style inside of a 5” or larger casing. (Will fit 4” casing but the tolerance is very tight).
-
2” pipe with reducer coupling inside of 5” or larger casing. (Will fit 4” casing but the tolerance is very tight).